Wash Hydro • Shop Online
2318 18th Street NW
Washington, DC
(202)-750-7760
About Us In-Store
Workshops
Employment Customer Rewards Customer Feedback Employee Login Open Monday-Saturday 10am-10pm, Sundays 12pm-8pm
24 Items Found.Viewing Page 1 of 3 Next Page >> Sort by
Type: Miscellaneous
Subtype: Movers/Support
GroXcess Rope Ratchet® suspension systems provide nearly effortless support to a heavy grow light or other piece of equipment. These 1/8-inch GroXcess Rope Ratchet systems support up to 75 pounds individually and a total of 150 pounds per pair. Six-foot lengths of rope are pre-fed through the ratchets for easy height adjustment without tying and untying knots. Included carabiners easily connect and disconnect equipment. Each Rope Ratchet unit also serves as a tie-down system and is handy for countless garden and non-garden uses. Pack of two.
Type: Miscellaneous
Subtype: Movers/Support
The GroXcess Rope Ratchet® heavy-duty suspension system provides nearly effortless support to even the heaviest grow light or other piece of equipment. The 1/4-inch GroXcess Rope Ratchet supports up to 150 pounds. An 8-foot length of rope is pre-fed through the ratchet for easy height adjustment without tying and untying knots. The included carabiner easily connects and disconnects equipment. Two 1/4-inch Rope Ratchets are needed for most suspension applications. Also serves as a tie-down system and is handy for countless non-garden uses.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® 3-feet ¼-inch Extender Rail has a variety of uses and is compatible with the LightRail 3.0, 3.5, 4.0 and 4.2. When added to the standard 6-foot 6-inch rail, they can be used with the Auxiliary Trolley, to aid in festooning vent tubing, or with the Add-A-Lamp parts to run 2 lamps in a 9 foot configuration, instead of a 12 feet configuration. Can also be used to run high intensity lights over 9 feet during periods of less light needed.
Type: Miscellaneous
Subtype: Movers/Support
LightRail 6 feet 6 inch New Rails work with LightRail 3.5 and 4.0 as well as the older LightRail 3.0 and will handle the heaviest reflectors (75 lbs) when mounted continuously along the rail to a board, or as much as 35 lbs mounted only from each end.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® Add-A-Lamp Kit is used to compliment existing LightRail 3.0, 3.5, 4.0 or 4.20 systems by adding a second light in order to move two lights in line up to 12 feet with adjustable run length and reflector spacing. The kit contains one split 6-foot 6-inch rail, one push pull rod, one auxiliary trolley, mounting hardware and instructions.
Type: Miscellaneous
Subtype: Movers/Support
LightRail 3.5 IntelliDrive 10 rpm Motor travels approximately 4 feet per minute and has a zero-to-sixty-second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth form end to end and allows for equal light-time for the entire run. it comes complete with installation hardware, instructions and a two-year warranty.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® 3.5 IntelliDrive Kit comes complete with a 10-RPM motor and a two-piece 6.5-foot rail, installation hardware and instructions. LightRail 3.5 travels at 10 RPM (approximately 4 feet per minute) and has a zero-to-sixty-second adjustable time delay for pausing the lamp at the end of each run. This helps promote even growth from end to end and allows for equal light-time for the entire run. LightRail 3.5 will move hoods of multiple sizes and weights and is a scalable system in which up to three lights can move in-line with the use of one motor. Two-year warranty.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® RoboStik, for LightRail 3.0, 3.5, and 4.0, hangs a horizontal reflector perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to the direction of travel. It is packaged with hardware and instructions in a white box with label tape.
Type: Miscellaneous
Subtype: Movers/Support
The LightRail® Trolley Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0 comes packaged with 4 new trolley wheels and screws in a header labeled zip lock.
Type: Miscellaneous
Subtype: Movers/Support
LightRail® Add-A-Bar Kit for LightRail 5.0 is for adding a second crossbar that extends to 81, 87, or 93 inches. Comes with an LR5 Auxiliary Trolley, crossbar, push-pull rod, mounting hardware and instructions.